Passive Automatic Control Water Meter

• Customization: Available
• Install: Horizontal
• Medium Temperature: Cold Water
• Model NO.: LXSJS~15E~20E
• Level Measurement: B
• Counter Instructions: Digital
• Nominal Diameter: 15-20
• Application: Civil
• Principle: Speed of Water Meter
• Medium Pressure: General Water Meter
• Work Environment: Dry Water Meter
• Stucture: Intelligent IC Card
• Working Pressure: P<=1.0MPa
• Transport Package: Export Carton, Plastic Pallet
• Specification: Brass body, brass connectors
• Trademark: OEM
• Origin: Ningbo, China
• HS Code: 9028201000
• Production Capacity: 30000PCS/Month

Product Description

No electronic parts, all mechanical quantitative device, the realization of prepayment management.
Suitable for outdoor installation in rural areas with complex environment, without rust and corrosion.

Description

This water meter is the company's independent research and development, independent manufacturing of a new mechanical pre-purchase quantitative water meter.Can achieve full mechanical automatic control switch valve, manual setting pre-purchase tonnage of a water meter.This meter is accurate, easy to operate, easy to install, suitable for urban and rural water supply measurement and management.

Features
 

1. Safe and reliable: all mechanical structure, stable, anti - interference, and electricity independent.
2. Warning hint: when the remaining water is insufficient, the water output decreases slowly.
3. Real-time display: users can view the remaining amount of water through the reading window.
4. Automatic closing: when the water meter consumption reaches the amount of water purchased by the user, the valve will be automatically closed.

MAIN TECHNICAL DATA
 

1. Working pressure:      P≤1.0Mpa
2. Pressure loss:         △P≤0.063Mpa
3. Working temperature:  0.1ºC~30ºC
4. Flow parameters

Type	Size	Q3/Q1	Q3	Q2	Q1
	mm		m3/h
LXSJS-15E	15	80	2.5	0.05	0.031
LXSJS-20E	20	80	4	0.08	0.05

INDICATING ERROR

At low zone is ±5% from minimum flow rate (q1) to transitional flow rate (q2) exclusive boundary
At high zone is ±2% from transitional flow rate (q2) to overload flow rate(q4)
 

1. Under normal working conditions, after 100 valve switches, the leakage shall not exceed the range of the following table

Size/mm	Leakage m3/h≤
15	0.015
20	0.02

DIMENSIONS AND WEIGHT
 

Type	Size	Length L	Height H	Width B	Connecting Thread		Weight
	mm				D	d	kg
LXSJS-15E	15	185	120	95	G3/4	R1/2	1.2
LXSJS-20E	20	215	123	95	G1	R3/4	1.4

Installation and maintenance
 

1. Water meter selection should be based on the pipe often used flow rate is less than or close to the common flow rate of the water meter is appropriate, can not be determined simply by the pipe diameter water meter.
2. Water meter must be installed horizontally, counting up, the arrow direction of the case should be consistent with the flow direction, the top of the water meter should be left more than 200mm of space, in order to facilitate the purchase of water operation;Water meter must be installed in front of the valve, so as to disassemble and pre-purchase water meter.
3. Installation location should avoid exposure, freezing, pollution and water flooding, so as to disassemble and read the meter.
4. Before the new installation of pipes, be sure to wash the stones, silt, hemp and other debris in the pipe clean before installing the water meter, so as not to cause water meter failure.
5. To measure correctly, the tap should be higher than the meter.
6. Water meter should not be directly connected to the pipe, water meter and pipe should be connected by connecting pipe, sealing washer, connecting nut, disassembly, do not force hard wrench, so as not to twist the case water meter affect normal operation.
7. It is strictly prohibited to install and disassemble the water meter by yourself and install it improperly, so as not to cause damage to the metering machine and make the water meter unable to work normally.

FACTORY: